Pelaksanaan pembangunan balok lantai 2 gedung Pondok Pesantren Ashhaburratib untuk mendukung kegiatan pembelajaran
DOI:
https://doi.org/10.22460/as.v8i2.27254Kata Kunci:
balok, gedung, tulanganAbstrak
Ashhaburratib Islamic Boarding School is an institution that operates in the field of social education. However, the condition of the Islamic boarding school building is in poor condition due to problems on the 2nd floor of the Islamic boarding school building. The owner of the Islamic boarding school has started efforts to build the second floor to accommodate the increase in students, but has stopped at the stage of installing reinforcements for the columns in one of the buildings. The unsustainability of this development was due to the death of the Islamic boarding school owner, so that on the 2nd floor of the building only reinforcement and columns were installed. To deal with this problem, the Abdimas Team held a Community Service program entitled "Implementation of Beam Work on the 2nd Floor of the Ashhaburratib Beji Islamic Boarding School Building, Depok, West Java". This program is held in order to implement the Tri Dharma of Higher Education and is a routine and programmed matter to help solve problems faced by the community. Beams are an important part of a building structure and are the part of the structure that functions to support the load of the upper structure and distribute it to the columns.
Referensi
Ariyanto, A. S. (2022). Korosi pada Baja Tulangan dan Pencegahannya ( Studi Kasus Gedung Ruko Yos Sudarso Square Semarang ). Jurnal Teknik Its, 6(1), 3036–3041.
Fahirah. (2012). Korosi pada Beton Bertulang dan Pencegahannya. SMARTek, 5(3), 190–195.
Fauzi, H. A. (2013). Evaluasi Kinerja dan perbaikan struktur Beton Gedung Pendingin Air. M.I. Mat. Kost, 13(1), 9–15.
Hermansyah. (2019). Kajian Kerusakan pada Konstruksi Bangunan Basement Cooling Water Pump (CWP) PLTU Pembangkitan Sumatera Utara Bagian Utara Sektor Pembangkitan Belawan. Jurnal Teknik, 8(1), 13–21.
Kuswinardi, L. M. P., Sinurat, R. T. A., & Tobing, P. (2021). Analisa Struktur Dan Metode Pelaksanaan Kolom Dan Balok Pada Pembangunan Gedung Apd Pln Medan. Jurnal Ilmiah Teknik Sipil Agregat, 1(1), 6–14. https://doi.org/10.51510/agregat.v1i1.55
Mulyadi, A. A., & Walujodjati, E. (2022). Pengaruh Korosi Tulangan Secara Alami pada Balok Beton Bertulang Terhadap Kuat Lentur dan Geser. Jurnal Konstruksi, 20(2), 299–310. https://doi.org/10.33364/konstruksi/v.20-2.1213
Nawy, E. G. (1998). Beton Bertulang Suatu Pendekatan Dasar. PT Refika Aditama.
Ngudiyono, N. (2011). Pengaruh Korosi Tulangan Baja Terhadap Kuat Lekat Balok Beton Bertulang (Influence Corrosion of Steel Reinforcement to Bond Strength Reinforced Concrete Beam). Jurnla Teknik Rekayasa, 12(1), 80–87.
Permadi, L. B., & Palupi, A. E. (2014). Analisa Laju Korosi Pada Baja Karbon Ringan (Mild Steel) Dengan Perlakuan Bending Pada Media Pengkorosi Larutan Asam. Jurnal Teknik Mesin, 03(01), 49–54.
Saputra, J., Sasongko, I. H., & Tiyani, L. (2022). Pembuatan Instalasi Pengolah Cuka Kayu Di Kelurahan Beji Timur , Depok , Jawa Barat. JMM (Jurnal Masyarakat Mandiri), 6(3), 2322–2331.
SNI 2847:2019. (2019). Persyaratan Beton Struktural untuk Bangunan Gedung. Badan Standarisasi Nasional.
SNI 2847. (2019). Persyaratan Beton Struktural untuk Bangunan Gedung. Standar Nasional Indonesia, 8, 720.
Stefanus. (2020). Analisis Biaya Perbaikan dan Perawatan Gedung Sekolah Swasta X. Jurnal Muara Sains, Teknologi, Kedokteran, Dan Ilmu Kesehatan, 4(1), 109–114.
Utomo, B. (2009). Jenis Korosi Dan Penanggulangannya. Kapal, 6(2), 138–141. https://ejournal.undip.ac.id/index.php/kapal/article/download/2731/2421
Wibowo, & Gunawan, P. (2016). Pengaruh Korosi Baja Tulangan Terhadap Kuat Lekat Beton Bertulang. Menara: Jurnal Teknik Sipil, 1(2), 18. https://doi.org/10.21009/jmenara.v1i2.7861
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).